Handi-Clean Handi-Coat Floor Finish (Pack of 4/1-Gallon) - F5402
HANDI-COAT is formulated as a high quality, high solids industrial and institutional floor finish. It will give the user a very balanced performance when applied to a properly prepared surface. It is a high solids finish made from a Zinc-crosslinked acrylic polymer blended with resins and polyethylene wax emulsions.
Effective cleaning will lengthen the life of the finish. Damp mopping will effectively clean the finish and maintain its gloss. Use neutral and synthetic type cleaners. Cleaners with ammonia or solvents will strip or damage the finish.
Machine buffing with a spray buff solution will enhance the gloss and hardness of the finish and will give the user a freshly polished look for much longer periods of time. If signs of wear develop restore with the application of repair coats, especially in high traffic areas.
Care should be exercised in the choice and usage of mop treating solutions. Some have oils, which may cause improper adhesion for repair coats.
Dry Bright Gloss: Excellent
Drying Time: 25 Minutes
Coverage: 1000-2000 Sq. Ft. Gal.
Color: Milky White
Buffability: Very Good
Slip Resistance: Excellent
Apply HANDI-COAT with a clean string mop or applicator spreading in a full uniform coat and allow it to dry thoroughly. Drying time is approximately 25 minutes. Surface should be clean and dry before application.
HANDI-COAT can be used on almost all types of resilient floors. Use with or without a sealer. If floor is very porous, for best results use SR29 sealer under coater or a heavier than normal coat of this finish. Then apply lighter coats of HANDI-COAT.
Use a solution of a sufficient floor stripper for complete removal. We recommend those made by Handi-Clean.