Handi-Clean Bright Side Floor Finish 5-Gallon Pail - F5375-E
Bright Side Floor Finish is a 20% solid, high quality industrial floor finish. It will give the user a very balanced performance when applied to a properly prepared surface. Bright Side combines excellent durability with a "wet look" response to high speed maintenance.
Bright Side can be used on almost all types of resilient floors. It dries bright and hard for a high gloss finish. It is long wearing and detergent resistant. Use neutral and synthetic type cleaners for damp mopping. Spray buffing with a high speed buffer will enhance the gloss and hardness of Bright Side and will give a freshly polished look for longer periods of time.
Coverage is 1500-2400 square feet per gallon, depending on porosity of floors. If floors are very porous, we recommend the use of a sealer before using Bright Side.
Surface should be clean and dry before application. Any excess build up of wax or finishes should be removed.
Apply BRIGHT SIDE with a clean string mop or applicator, spread in a full uniform coat and allow to dry thoroughly (about 20-30 minutes). If the floor is very porous, for best results use a sealer under coater or a heavier than normal coat of this finish followed by light coats. To strip BRIGHT SIDE, use a solvent type or an ammoniated stripper.